The William Garvey 'Wave Basin' was developed to complement today's contemporary style of bathrooms. It is constructed from teak veneer and the highest grade of marine ply available.
It can either be wall mounted or fixed in positioned on a counter top.
If wall mounted, it is done by the means of metal cantilever brackets and a timber wall plate.
For a secure and level installation, the wall itself should be flat, vertical and have either a solid timber or masonry structure to take screw fixings.
The PU lacquer we finish our products with has incredible adhesion and can be used in a variety of situations, you can be sure that there will be no lifting of the lacquer in any wet room environment in the future.
Wave Basins are fitted with standard 1 1/4" chrome Presflo (chainless) waste compatible with standard basin traps and the waste is fitted in the centre of the basin.
Overflows are not available on wave basins.
A Short Wave basin can be made bespoke to meet your project dimensions.
|internal depth (maximum)||70mm||2.8"|
All our products can be made bespoke to fit your project. Please just ask if you would like a one to be made to a different size or specification as we are very happy discuss options with you.
The cost of a Short Wave basin starts from £790, with bespoke sized sink costs depending on timber and labour involved.
For further information on bespoke size pricing please enquire via email@example.com
The hours hand polishing has resulted in a finish that feels like silk - it’s quite incredible.
Claire Tull BIID. Interior Designer
With regards to the care and cleaning of our products it’s simple: we suggest a non scouring household cleaner similar to that which you would use on the surface of an enamel bath. No extra special care is needed but we do not recommend using bleach on the surfaces.
In areas of hard water we do recommend using a water softening system to avoid calcium build-up. Perhaps once a year give them a good polish with a product similar to OSMO oil which can be found in most hardware outlets, this will rejuvenate them in the future.
With over 40 years’ experience in design and manufacture we really understand timber and know that you will have no problems when you use teak as you may with other woods, and our designs are well proven watertight over time.