toggle menu

Belfast Kitchen Sinks

From £800

William Garvey Belfast and Butler Kitchen Sinks are constructed from a laminated teak composite and are available as a single or double bowl. A deeper version - based on the traditional Belfast pattern is also available.

The internal corners of our sinks are rounded to a radius of 16mm to facilitate cleaning. Each sink comes complete with steel fixing brackets for attaching to the underside of a worktop. Alternatively, they can be supported from below on framing or a cabinet.

Our sinks are fitted with a standard 1½” Franke stainless steel basket strainer waste compatible with standard sink traps. The waste is fitted in the centre of the basin.

Overflows can be available but are not fitted as standard.

The PU lacquer we finish our products with has incredible adhesion and can be used in a variety of situations, you can be sure that there will be no lifting of the lacquer in any wet room environment in the future.

Dimensions Standard Single Standard Double Belfast Pattern
Length 595 mm 23.5" 800 mm 31.5" 595 mm 23.5"
Width 500 mm 19.5" 500 mm 19.5" 455 mm 18"
Height 200 mm 8" 200 mm 8" 255 mm 10"
Bowl Length 539 mm 21.2" 358 mm 14" 539 mm 21.2"
Bowl Width 444 mm 17.5" 444 mm 17.5" 399 mm 15.7"
Bowl Depth 163 mm 6.5" 163 mm 6.5" 218 mm 8.5"
Wall thickness 28 mm 1.1" 28 mm 1.1" 28 mm 1.1"
Weight 11.6 kg 25.5 lbs 16.2kg 35.5 lbs 13. kg 28.6 lbs
Crated Weight 12.6 kg 27.5 lbs 17.2 kg 38 lbs 14 kg 31 lbs
Crate Size 70x60x35cm 28x24x14" 90x60x35cm 36x24x14" 70x60x35cm 28x22x16"

All our products can be made bespoke to fit your project. Please just ask if you would like a one to be made to a different size or specification as we are very happy discuss options with you.

The cost of a single sink starts from £760, a double from £1070 and a Belfast or Butler sink from £800 with bespoke sized sink costs depending on timber and labour involved.

For further information on bespoke size pricing please enquire via info@williamgarvey.co.uk

I found the service from William Garvey to be exceptional from start to finish and their communications along the way very helpful indeed. I would not hesitate to use them again.
Pamela Jones

With regards to the care and cleaning of our products it’s simple: we suggest a non scouring household cleaner similar to that which you would use on the surface of an enamel bath. No extra special care is needed but we do not recommend using bleach on the surfaces.

In areas of hard water we do recommend using a water softening system to avoid calcium build-up. Perhaps once a year give them a good polish with a product similar to OSMO oil which can be found in most hardware outlets, this will rejuvenate them in the future.

With over 40 years’ experience in design and manufacture we really understand timber and know that you will have no problems when you use teak as you may with other woods, and our designs are well proven watertight over time.

PRODUCT HIGHLIGHTS

  • 'Dished' base so no pooling of water in corners
  • Teak and Cedar won't go mouldy like other timbers
  • Can be made as a single or double bowl

Available in:

  • Lacquered Teak

  • Unlacquered Teak

  • Grey Tinted Teak